Estimate on spillover effect of environmental pollution between peripheral areas

ABSTRACT

Interaction of environmental pollution between peripheral areas has become a central topic in the field of resources and environment but little is known about the actual impact on peripheral areas in the current literature. This paper sets out a simultaneous equation model to investigate the spillover effect of environmental pollution between China’s peripheral areas utilizing the panel data of 218 cities in China. Making use of indicators for measuring the impact on environmental pollution, it identifies that environmental pollution between cities of China has a significant two-way spillover effect. After standardization of variables, it is found that the spillover effect of peripheral areas on urban environmental pollution cannot be neglected. Nearly, a third of the environmental pollution level in a city is induced by the environmental pollution in peripheral areas. If the indicator of environmental pollution in peripheral areas is missing, wrong conclusions will be drawn. Therefore, government should shift the emphasis of environmental regulation from local to global, and improve the overall environmental quality through coordinated management of regional environment.     

Effectiveness of a physical activity program on weight,physical fitness,occupational stress,job satisfaction and quality of life of overweight employees in high-tech industries: a randomized controlled study

Introduction. This study aimed to examine the effectiveness of a physical activity (PA) program on weight control, physical fitness, occupational stress, job satisfaction and quality of life of overweight and sedentary employees in high-tech industries. Methods. Participants in the intervention group (n?=?37) were instructed to carry out a PA program at moderate intensity for 60?min/session, 3 sessions/week for 12 weeks. Those in the control group (n?=?38) received no PA program and were asked to continue their routine lifestyle. Evaluations were performed at baseline and at the end of the intervention. Results of structured questionnaires and blood biochemistry tests and evaluations of physical fitness were analyzed. Results. The PA program effectively reduced the number of risk factors for metabolic syndrome and body fat percentage, and improved physical fitness such as flexibility, muscular strength and endurance and cardiorespiratory endurance. The intervention also significantly decreased levels of serum triglyceride, total cholesterol and low-density lipoprotein cholesterol. Significant positive effects on work control, interpersonal relationships at work, global job satisfaction and quality of life were also demonstrated. Conclusion. This study showed that a PA program can be helpful in improving physical, physiological and psychological outcomes for overweight and sedentary employees in high-tech industries.     

A product analysis-based study on the mechanism of inflammable gas explosion suppression

To study the mechanism of the suppressing effect of Expanded Aluminium (EA) on the premixed gas explosion, premixed methane-air and propane-air gases were undergone explosion reaction in the presence of EA in a self-designed closed pipeline with the overpressures and the compositions, rates and sensitivities of products analyzed. The results showed that the 9.5% methane-air and 5% propane-air explosions produced peak pressures decreased by 79.3% and 65.6%, and residual methane and propane contents increased by 270% and 560% respectively than without EA. In addition, the results revealed that the explosions of propane in the presence of EA produced less methane and carbon oxides contents, but more ethylene and propylene contents. The simulation showed that H, O, and OH are the key factors affecting the rate of products. The product compositions, together with other parameters, suggested that EA decreased temperature, inhibited chain initiation and propagation reaction, but facilitated chain termination reaction by advancing and accelerating the gas phase and wall destruction reaction of radicals, especially collisions and concentration of key free radicals. This new research method based on the analysis of explosion products can be used for in-depth research into gas explosion features and shed light on the suppressing mechanism of EA in flammable gas explosion.     

河流水质自动监测站选址适宜性评价

为建立和量化适于河流水质自动监测站选址的评价方法体系,提出了河流水质自动监测站选址一致性、可行性和适宜性评价问题,并建立了选址可行性和适宜性评价2套指标体系。以自动站选址与手工断面位置不一致为前提,利用累乘指数判断选址可行性,在可行的基础上利用模糊综合评价进一步分析选址的适宜性。应用案例显示,罗汉大桥断面水质自动站选址于手工断面下游150 m处是可行的,并且此选址高度适宜,在具有水质代表性的同时兼顾成本和运维管理需求。     

环境规制、省际产业转移对污染迁移的空间溢出效应

目前我国正在积极地探寻经济增长高质量发展,生态环境与经济持续、稳定的和谐发展至关重要。虽然政府制定了相关的环境治理政策,但我国环境治理整体效果仍然欠佳。自从分税制改革以来,地方政府为了获得较高经济效益,会放松对环境管理,导致环境治理高投入低成效。同时,由于区域经济发展不平衡导致政府在制定相关环境治理政策时带有区域性特点,迫使高污染高能耗企业迁移至环境规制相对薄弱的地区,由此产生污染迁移的现象。基于此,对2003—2017年30个省区市(港澳台和西藏除外)环境污染总指数的空间溢出效应进行探讨,构建动态空间杜宾模型研究环境规制、省际产业转移对污染迁移的影响。研究结果表明:①环境规制总体上对环境污染具有显著直接效应且存在正向空间溢出效应,当某省环境规制强度增加,环境污染总指数会降低,从而引起污染向相邻省份转移,造成相邻省份的环境污染总指数上升。②省际产业转移整体上对环境污染具有显著直接效应且存在负向空间溢出效应,当某省的产业转移到相邻省份时,会缓解本省环境污染,却加重相邻省份的环境污染程度。这就需要中央政府加强对于各省区市的环境管控,统筹各区域的联防联治机制。产业转移承接省份在招商引资的过程中不仅要考虑本省环境承载能力和环境治理能力,还要考虑入驻企业自身污染排放处理能力,并将污染排放指数纳入筛选条件。同时,产业转移承接省份要引入企业的生产工艺、技术、研发团队等,运用技术溢出效应提升区域环境治理水平。     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

Alcohol-impaired motorcyclists versus car drivers: A comparison of crash involvement and legal consequence from adjudication data

Introduction: Driving under the influence (DUI) increases the probability of motor-vehicle collisions, especially for motorcycles with less protections. This study aimed to identify commonalities and differences between criminally DUI offenses (i.e., with a blood alcohol concentration (BAC) of 80 mg/dL or higher) committed by motorcyclists and car drivers. Methods: A total of 10,457 motorcycle DUIs and 8,402 car DUIs were compared using a series of logistic regression models, using data extracted from the documents of adjudication decisions by the courts of Jiangsu, China. Results: The results revealed that offenders from the high-BAC group (i.e., 200 mg/dL or higher) accounted for more than 20% of the total DUI offenses, and were more likely to be involved in a crash and punished with a longer detention. Motorcyclists had a higher likelihood of crash involvement, and were also more likely to be responsible for single-vehicle crashes associated with higher odds of injury sustained, compared to alcohol-impaired car drivers. In the verdict, motorcycle offenders were more likely to receive a less severe penalty. Conclusions: Interventions are clearly required to focus on reducing in the high-BAC group of offenders. For alcohol-impaired motorcyclists, their risks of crash and injury against BAC climb more steeply than the risks for car drivers. The factors including frequent occurrences, uncertainty of detection, and short-term sentences may weaken the deterrence effect of the criminalization of motorcycle DUI. Practical Applications: The traffic-related adjudication data support traffic safety analysis. Strategies such as combating motorcycle violations (e.g., unlicensed operators or driving unsafe vehicles), undertaking education and awareness campaigns, are expected for DUI prevention.     

The acceptance of personal protective equipment among Hong Kong construction workers: An integration of technology acceptance model and theory of planned behavior with risk perception and safety climate

Introduction: The phenomenon that construction workers do not use personal protective equipment (PPE) is a major reason for the high occurrence frequency of accidents in the construction industry. However, little efforts have been made to quantitatively examine the factors influencing construction workers’ acceptance of PPE. Method: In the current study, a PPE acceptance model for construction workers (PAMCW) was proposed to address the noted need. The PAMCW incorporates the technology acceptance model, theory of planned behavior, risk perception, and safety climate for explaining construction worker acceptance of PPE. 413 construction workers participated in this study to fill out a structured questionnaire. The PAMCW was analyzed using structural equation modeling. Results: Results provide evidence of the applicability of the technology acceptance model and theory of planned behavior to the PPE acceptance among construction workers. The positive influence of safety climate and risk perception-severity on attitude toward using PPE was significant. Safety climate positively influences perceived usefulness. Risk perception-worry and unsafe was found to positively affect intention to use PPE. Practical Applications: Practical suggestions for increasing construction workers’ use of PPE are also discussed.     

Inhibiting effects by Fe2O3 on combustion and explosion characteristics of ABS resin

The global increase in the use of, and reliance on, plastics has prompted the demand for acrylonitrile-butadiene-styrene (ABS) resin in various fields. With this increased requirement, numerous failures have occurred in the ABS process. Those incidents, resulting from electrostatic discharge, powder accumulation, heat accumulation, construction sparks, and plant fires, have caused dust fire and explosions.In this study, the ABS resin was gleaned from the site and tested for its explosion parameters, including minimum ignition temperature of dust cloud (MIT_C), minimum ignition energy (MIE), and minimum explosion concentration (MEC). To improve loss prevention in the manufacturing process, ferric oxide (Fe₂O₃) as an inert additive was added in the ABS powder. According to the MIE test, Fe₂O₃ has an apparent inhibiting effect on dust explosion for the ABS dust. With the proportion of Fe₂O₃ increased from 25 to 50 mass% in ABS, the MIE increased from 67 to 540 mJ. The explosion tests via 20-L apparatus indicated that Fe₂O₃ mixed with ABS could not increase the MEC significantly. However, the explosion pressure dropped by increasing in the ratio of Fe₂O₃ in ABS. This inerting strategy of ABS was deemed to substantially lessen the probability and severity of fire and explosion.     

Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.